Tech

Must-Own Electronic Tools That Every Engineer Should Consider

Electrical projects can be a bit tricky, and that’s why an engineer needs to employ electronic tools. 

However, picking the important ones can be a tough task. To help you with that, we have created a list of essential tools that every engineer needs. Keep scrolling to know more about their uses and benefits.

A hammer

This tool is used for most engineering work. A hammer is mainly used for driving nails into hard surfaces. Not just this, it can also be used for demolition of structures. Earlier, the tool was used for locomotive repair. There are around 40 types of hammers out of which claw, ball, and cross pein pin hammers are the most popular and common ones. 

Technology is moving forward, but this handheld tool is still considered to be very reliable for engineering work.

Drilling machine

Also known as drill press, this tool is used for making holes in wooden surfaces, metals, and walls. The machine contains a drill or a driver that creates holes in hard surfaces. Before you start cutting the hole, you should know how to set it against the wall with the right speed required for it. Every drilling machine varies in speed, power, and size. Some drilling machines also offer the hammer function. 

While most tools on this list work great for general day-to-day activity, they might take a back seat for some jobs. Certain surfaces require microscopic introspection. For that purpose, you may need a microscope. If you’re planning to buy this tool, click here

Plier

An engineer’s toolbox is incomplete without a plier! This handheld tool holds small objects firmly with its tong, which helps in minimizing the pressure. It is also used for bending and compressing different types of materials. Normal pliers are different from the ones that are used for electrical work. 

They have sharp narrow tips that can hold dainty objects like thin wires. Not just this, a plier is also needed for cutting small bolts and bending large gauge wires.

Wirecutter

Here comes the most important tool that every engineer is looking for. Be it for automotive work or home wiring; wire cutter will do the deed. However, wire cutters used for electric work are slightly different. They have sharp blades that can easily cut thick wires and insulated handles to prevent electric shock. 

This tool is mainly used for cutting copper, brass, iron, aluminium, and steel wires. The shape and size of every wire cutter are different, each designed to meet specific tasks. 

Voltage tester

An electric tester is used for measuring electric current flow, and for that, voltage tester is the best tool. This tool contains insulated wires and two neon bulbs. For serious electrical work, a non-contact voltage tester is preferred. A non-contact voltage tester is safer to use, just place it close to the outlet store, and electricity will be detected. A voltage tester is very simple to use, saves time, and money as well.

Good dust mask

Being an engineer is an exciting job, but it also means that you will be exposed to many airborne germ and disease transmission. To avoid that, a good dust mask is needed, which helps in protecting the lungs. 

The mask restricts the dust particles and germs present in the air; it mainly cleans the air that you inhale. For days when an engineer is required to work at factories or construction sites, a dust mask is required.

Screwdriver

This tool is used for turning screws with slotted heads. A screwdriver is usually hand-operated, which makes it easy to use as well as pocket-friendly. To work on different tasks, every screwdriver varies in shape and size. It consists of a handle that is attached to a long shank. The shank is usually metal with a flat end. This tool is used for both installing and removing screws.

These seven essential electric tools we picked for you will make every task an easy one.

Leave a Reply